Risers made to fit between the Mini Mate Camper body and the axle. Installing these riser spacers will raise the body by 1", which can help add clearance for dropping the jack stands for leveling. Made of a durable poly-wood material, these stands will never rot or rust. This kit comes with 2 risers and 4 longer (3") axle bolts. New Mini Mate Campers already have these risers installed. Only install this kit if your axle is mounted directly to the body without any spacer previously installed. Riser bolt hole centers are 7 3/4" apart. Installing these risers will NOT allow for a larger wheel to be installed. Only a 4.80x8 tire and wheel should be used on the Mini Mate Camper.
To install, raise the camper to the highest position on the jack stands. Remove the axle nuts, lock washers, and washers. Drop the axle and remove the 4 existing axle bolts and washers. Install the new longer bolts with existing washers. Move the axle back in place and secure with existing washers, lock washers, and nuts. Torque axle nuts to 60 ft. lbs.